This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
C90 - Dynamic Radial Rating (90 million revolutions)4
N/A184000 lbf819000 N
C1 - Dynamic Radial Rating (1 million revolutions)5
N/A710000 lbf3160000 N
C0 - Static Radial Rating
N/A927000 lbf4130000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6
N/A295000 lbf1310000 N
Factors
K - Factor7
N/A0.62
e - ISO Factor8
N/A0.94
Y - ISO Factor9
N/A0.64
G1 - Heat Generation Factor (Roller-Raceway)
N/A2500
G2 - Heat Generation Factor (Rib-Roller End)
N/A149
Cg - Geometry Factor10
N/A0.240
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.
This website or its third-party tools use cookies. If you want to know more or to change your cookie settings on your computer or device, please see our cookie policy. By closing this banner, or continuing to use this website, you consent to the use of cookies. Cookie Policy AcceptDecline
Like most things, choosing a tapered roller bearing also has disadvantages. When misalignment occurs, the results can cause irreversible damage. If you know the cause for misalignment is high, choosing a different option, such as spherical roller bearings, would be a good idea.
Tapered roller bearings have high load capacities.These capacities far exceed ball bearing limitations and rival similar spherical roller bearing capacities.
Inch system bearings are normally assigned individual part numbers for the inner ring and for the outer ring, whereas ISO (metric) bearings are assigned a unique part number for the bearing assembly as a whole, which includes both inner and outer ring.
Single row tapered roller bearings must be used either with a second bearing (fig. 1) or as a matched pair (Matched tapered roller bearings). The bearings must be adjusted against each other until the requisite clearance or preload is obtained (Selecting preload).
Common bearing failure modes during service mainly include contact fatigue, wear, fretting corrosion, overheating, etc., which usually occur on the surface of raceway and rollers [1], [2], [3].
Class 00 (ABMA), Class A (ISO) and Class P2 (DIN) bearings are precision grade tapered roller bearings designed for higher speed and accuracy applications than standard class bearings.
Single row tapered roller bearings are typically used in applications with combined loads. Single row tapered roller bearings can also be used in sets. Single row tapered roller bearings can be matched face-to-face, back-to-back or in tandem to deliver specific advantages depending on operating conditions.
For heavy combined loads, tapered roller bearings are ideal, whereas spherical roller bearings are better for high radial loads with some axial load. Speed and Temperature Requirements: Consider the operational speed and temperature range.
SKF is generally known for its low-friction bearings, which are ideal for high-speed applications.On the other hand, Timken excels in high-precision and heavy-duty applications. Having worked with both brands, I can say that your choice should depend on the specific performance requirements of your machinery.
Are Timken wheel bearings made in the USA? Timken wheel bearings are made in the USA, Mexico, and a number of other countries. The bearings are all made to the same high worldwide standard which Timken is well known for.
“J” Type: Two piece ribbon consisting of two halves that are assembled one half from one side, and the other half from the opposite side. Fold down tabs secure the two halves. This type of cage is guided by the balls. “Loose” clinch type provides lower torque.
The 6203 is a 17 mm Ball Bearing that can be used in many rotary and factory automation applications. The 6203 Deep Groove Ball Bearings is an open style bearing. The 6203Z ball bearing is a single row raceway and single shielded. The 6203ZZ ball bearing has a single row raceway and it is shielded on each side.
How to Check Authenticity. Once you've downloaded the WBA Bearing Authenticator app, simply scan the QR code on the packaging label to get an instant response about the authenticity of the bearing. The app is available worldwide for iOS and Android devices.
These bearings are typically used in heavy-duty industrial applications such as construction equipment, mining equipment, and paper mills. These bearings must be properly lubricated to ensure smooth operation and long life.
In many applications tapered roller bearings are used in back-to-back pairs so that axial forces can be supported equally in either direction. Tapered roller bearings are widely used in automotive vehicle wheel bearings handling radial and axial loads.
Tapered roller bearings are capable of carrying both radial and axial loads but largely used for applications where axial load component predominates. They are often used in pairs to take the thrust load in both directions.
Introduction: My name is Nathanael Baumbach, I am a fantastic, nice, victorious, brave, healthy, cute, glorious person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.
